Articles Vegas Valley Beverage

Maintenance

Commercial Espresso Machine Maintenance Schedule: Daily, Weekly, Monthly and Yearly

Every day

  • Backflush each group with a blind basket and an espresso machine detergent at closing, following the manufacturer's instructions. Machines without a three-way valve should not be backflushed.
  • Brush the group gaskets and shower screens to clear coffee grounds.
  • Purge and wipe the steam wands after every drink, and soak the tips if milk has dried on them.
  • Empty, rinse and dry the drip tray and drain box. Run hot water down the drain to keep it clear.
  • Wipe the exterior and the cup warmer, and empty the grinder's chute of old grounds.

Every week

  • Soak portafilters (without plastic handles in the solution) and baskets in espresso detergent to remove coffee oils.
  • Remove and clean shower screens and dispersion screws if your machine allows it.
  • Check the steam wand tips for blocked holes.
  • Clean the grinder hopper and check burr adjustment. Coffee oils go rancid and affect flavor.
  • Look at the pressure gauges. Note any change in brew pressure or steam boiler pressure from what is normal for your machine.

Every month

  • Check the filter's gallon meter or install date and plan the next change.
  • Inspect the drain line and the drain box for buildup.
  • Test the hot water tap and the autofill for normal operation.
  • Look for leaks, drips or steam escaping from valves and fittings.

Every three to six months: preventive maintenance by a technician

Busy cafes, hotels and casinos usually need preventive maintenance every three months. Lower-volume locations can often go six months. A typical visit covers:

  • Replacing group gaskets and shower screens, which harden and stop sealing over time
  • Checking and adjusting brew pressure, steam boiler pressure and brew temperature
  • Inspecting steam and hot water valves, vacuum breakers, and safety and expansion valves
  • Checking the boiler and heating elements for scale and the water treatment for correct capacity
  • Inspecting the pump, motor, flow meters and electrical connections

Every year

  • Review the filtration system and replace components at the end of their service life.
  • Have a technician check for scale inside the boiler and decide whether descaling is needed.
  • Replace grinder burrs when they reach the manufacturer's rated life, which is measured in pounds of coffee ground.
  • Review the machine against your volume. If you have outgrown it, plan an upgrade before peak season instead of during a breakdown.

Keep a log

A simple log of cleaning, filter changes and technician visits makes it easier to spot problems early and is often needed for warranty claims. Vegas Valley Beverage keeps a service history for every machine we maintain. Ask us about preventive maintenance.

Frequently asked questions

How often should a commercial espresso machine be serviced?

Every three months for busy locations and every six months for lower volume, plus daily backflushing and cleaning by staff.

How often should espresso group gaskets be replaced?

Usually every six to twelve months, or sooner on busy machines. Replace them when shots leak around the portafilter or the handle locks past its normal position.

Should I backflush my espresso machine every day?

Yes, with detergent at the end of the day, if the machine has a three-way solenoid valve. Check the manual first, since some machines should not be backflushed.

Need a technician?

Vegas Valley Beverage services commercial coffee, espresso and tea equipment across the Las Vegas Valley, 7 days a week.

Related: Commercial espresso machines · Preventive maintenance and repair